imernchavez

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 2, 2022 at 7:23 am in reply to: Suction cup tool #2023
    imernchavez

      Pull request created! My first public contribution to GitHub. More to come soon 😉

      July 23, 2022 at 12:02 am in reply to: Suction cup tool #2017
      imernchavez

        Good eye! Yes it helps with the sag and improves the accuracy of the robot a bit.

        July 20, 2022 at 5:18 pm in reply to: Suction cup tool #2011
        imernchavez

          image

          • This reply was modified 2 years, 5 months ago by imernchavez.
          • This reply was modified 2 years, 5 months ago by imernchavez.
          July 18, 2022 at 4:02 am in reply to: Extra range of motion for Art3 #2008
          imernchavez

            Thanks! I added the FreeCAD file to the Thingiverse link.

            November 15, 2021 at 12:27 am in reply to: Fans do not fit #1838
            imernchavez

              For Art1Top, you need to attach the fans first to the “Art1FanHolder” part, and then attach those to “Art1Top”. The fans are 40x40mm.
              I just realized that for BaseBoxBody the holes are too large for a 40×40 fan. Not sure what the deal is with that. (Still going through the process of building the robot myself). I might design and print an adapter, since I bought all the fans already.

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)