Some doubts about the Thor robot …

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #515

    Hi, in Hackaday website we can’t found the new piece that is located at the base, that supports the new model endstop of the robot, in order to print it.

    Another doubt is that at the pieces Art56CoverRing, Art56GearPlate, we found some slacks and we don’t know if in the original pieces there is a slack or not. (Art56GearPlate makes a vertical and lateral movement). Could you help us?


    Angel LM

      Hi Marta!

      First of all welcome to the Thor Community!

      The most updated files are the ones located in the Thor Github’s repository. I would recommend you to use that files instead of Hackaday ones.

      About the slacks you found on the Art5&6 pieces… Could you post a video to see what is happening? The vertical one sounds like the bolt that pass through the Art56GearPlate is not tightened enough, but without seeing it is hard to realise.

      Hope it helps!
      Angel LM

    Viewing 2 posts - 1 through 2 (of 2 total)
    • You must be logged in to reply to this topic.