Instruction Guide and documentation regarding this project.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #545 Quote

    I’ve been wondering if you guys did some kind of instruction guide for this project.We’re are currently having some issues with the grbl and gcode. Normally we send some simple coordinates and the serial monitor returns either error 20 or error 2 (both are related to unavailable commands or irregular values). We even tried sending G0 A0 B0 C0 D0 X0 Y0 Z0, but it returned error 20.Is this because we are not working with the micro end stop connected to the pcb or is this because another issue?
    With best regards,Thalles Machad

    #1065 Quote

    Hi I have been using G01 and it works.

    I will post a text file with a little test routine if you want.

    Martin Barr

    #1067 Quote

    Hi Thalles,
    I attach a text file I use to send to the grbl Arduino.
    I am using the Universal gcode tool to upload and send the commands.
    Hope this helps you.
    Martin Barr

    #1069 Quote

    Thank you very much for your help Martin.Gonna run some tests tomorrow and see how it goes.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.