Control PCB setup

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1866 Quote
    Wuggy
    Participant

    In the BOM it says that there are resistors, a capacitor, a fuse and diode required but in the Control PCB diagram (found here: http://thor.angel-lm.com/documentation/electronics/) there is no mention of any of those things. Are they still required in order to make a functional build? Thanks!

    #1872 Quote
    Angel LM
    Keymaster

    Hi Huggy!

    I’m sorry the documentantion is not clear in this specific topic, I’ll try to fix it in the future. Meanwhile, at BOM you can find the components and their references. The references are printed directly in the PCB in the places you should solder the components. There is also a electronic schematic of the Control PCB in its Github Repository that you can check.
    The wiring diagram on the Electronics documentation is helpful to know how to connect the motors, fans and sensors once you have soldered the PCB.

    Hope it helps!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.