Modified stl files to print on smaller area 3D printers

This topic has 4 replies, 5 voices, and was last updated 7 years, 8 months ago by Oliver Schumacher.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
February 27, 2017 at 8:36 pm #611
Danny Van den Heuvel
Hay to all new builders with a small 3D printer!
Good news!!!
Lot of parts has been improved to be printed on smaller 3D printers.

https://github.com/Danny-VdH/MODIFIED-STLS
March 5, 2017 at 11:59 pm #1235
Jamie Williams
They all look like amazing prints, could you tell me where you got your 16014ZZ bearing please. I can’t find a reasonably priced one.

Many thanks

Jamie
March 6, 2017 at 10:34 pm #1237
Jorge Turiel
Is a completed kit
March 7, 2017 at 11:07 am #1239
Angel LM
Admin
Hi Jamie,If you don’t mind the shipping time I would recommend you to buy it from Aliexpress (3,5€+Shipping)You can also find them in some 3D Printing local stores.
Hope it helps 😉
March 7, 2017 at 8:06 pm #1241
Oliver Schumacher
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.